1-800-691-1991 | 9am - 8pm ET
EN

HCL - Promise Technology R3600xiS/R3600xiD

Challenge

VeeamReadyRepo

Product Information:

Company name: Promise Technology
Product Family: Vess R3000 Series
Status: Veeam Ready - Repository
Classification Description: Verified backup storage that supports all Veeam backup and restore features.

*This Veeam Ready test was performed with storage having a configuration that includes SSD/Flash. As such, this classification only applies to similar configurations in which the same amount or more SSD drives are used. The use of non-SSD drives may negatively impact performance.

Solution

Product Details:

Model number: R3600xiS/R3600xiD
Storage Category: Hybrid RAID Storage Array
Drive quantity, size, type: 20 – 960/1920GB SSDs, 96 – multi-size SAS/SATA HDDs
Storage configuration: RAID6
Firmware version: FCS(13.03.0000.07)
Connection protocol and speed: 10 GbE iSCSI
Additional support: All models and configurations of Vess R3000 (including R3600xiS/R3600xiD,R3600tiS/R3600tiD, R3604fiS/R3604fiD) with specifications equivalent or greater than the above

General product family overview:

The Vess R3K Series unified storage appliance consolidates both block and file protocols onto a single hardware platform, providing today’s SMB IT operations with cost-effective ways to be flexible, meet performance goals while simplifying storage administration. High availability features design with active-active configuration, the Vess R3K Series storage solutions can be used in data-intensive environments such as virtualized, cloud data centers or mid-size to large scale surveillance installations utilizing the VESS A Series products where no downtime is required.

 

Veeam testing configuration:

Note: The following settings were used by the vendor to meet Veeam Ready testing requirements and should not be considered best practices. Additional changes or settings may be needed to meet the storage efficiency or performance needs for each environment. For each setting, reference links are provided for further clarification.
 

Veeam Build Number: 9.5.4.2866

Job Settings:

Deduplication: Enabled (Default)
Compression: Optimal (Default)
Storage Optimization: Local Target (Default)
 

Repository Settings:

Repository Type: Windows
Align backup file blocks: Disabled (Default)
Decompress before storing: Disabled (Default)
Per-VM Backup Files: Enabled
 

Vendor recommended configuration:

Hardware Settings:

  • No array deduplication used in testing
  • No array compression used in testing
  • Multipathing used in testing - MPIO
KB ID:
3087
Product:
Veeam Backup & Replication
Version:
9.x
Published:
2020-01-14
Last Modified:
2020-08-13
Please rate how helpful this article was to you:
5 out of 5 based on 1 ratings
Thank you for helping us improve!
An error occurred during voting. Please try again later.

Couldn't find what you were looking for?

Below you can submit an idea for a new knowledge base article.
Report a typo on this page:

Please select a spelling error or a typo on this page with your mouse and press CTRL + Enter to report this mistake to us. Thank you!

Spelling error in text

Knowledge base content request
By submitting, you agree that your personal data will be managed by Veeam in accordance with the Privacy Policy.

ty icon

Thank you!

We have received your request and our team will reach out to you shortly.

OK

error icon

Oops! Something went wrong.

Please go back try again later.