QNAP 90FU Series
Alliance Partner: |
QNAP Systems, Inc. |
Alliance Product: |
90FU series |
Program Category: |
Veeam Ready - Repository |
Category Description: |
Primary backup target solutions that have been qualified as meeting or exceeding both functional and performance tests for backup and restore operations. |
Article ID: |
1019 |
Veeam Product(s): |
|
Features and Attributes: |
|
Publication date: |
2024-07-19 |
Last modified date: |
2024-07-19 |
This Veeam Ready test was performed with storage having a configuration that includes SSD/Flash. As such, this classification only applies to similar configurations in which the same amount or more SSD drives are used. The use of non-SSD drives may negatively impact performance.
SMB write-through is supported on this platform and was used in the Veeam Ready testing. Continuous availability must be enabled for SMB share at the time of creation as it cannot be configured retrospectively. For more details about continuous availability read more at KB3124
Product Details
Model number: TS-h1090FU-7232P-64G
Storage Category: RAID Storage Array
Drive quantity, size, type: 4 x 2TB SATA SSD
Storage configuration: RAID 5
Firmware version: h5.2
Connection protocol and speed: 10GbE SMB/CIFS
Additional support: All models and configurations of QNAP 90FU Series with specifications equivalent or greater than the above
General product family overview:
The TS-h1090FU high-density NVMe all-flash storage features ten U.2 NVMe Gen 4 x4 SSD bays. The ZFS-based QuTS hero operating system supports inline data deduplication and compression for reducing I/O and SSD storage consumption.
Storage Category: RAID Storage Array
Drive quantity, size, type: 4 x 2TB SATA SSD
Storage configuration: RAID 5
Firmware version: h5.2
Connection protocol and speed: 10GbE SMB/CIFS
Additional support: All models and configurations of QNAP 90FU Series with specifications equivalent or greater than the above
General product family overview:
The TS-h1090FU high-density NVMe all-flash storage features ten U.2 NVMe Gen 4 x4 SSD bays. The ZFS-based QuTS hero operating system supports inline data deduplication and compression for reducing I/O and SSD storage consumption.
Veeam Testing Configuration
Veeam Build Number: 12.1.2.172
Vendor recommended configuration
Vendor Settings:
- Caching used: No
- Does vendor solution support SMB write-through? Yes
- How is SMB write-through enabled/disabled? Tutorial: https://www.qnap.com/en/how-to/tutorial/article/how-to-use-smb-3-0-in-qts-4-2
- Was SMB write-through enabled during the testing? Yes
- Networking: MTU=9000
- Multipathing / link aggregation used: No
- Array deduplication used in testing: No
- Array compression used in testing: No
Couldn't find what you were looking for?
Below you can submit an idea for an article.
Report a typo on this page:
Please select a spelling error or a typo on this page with your mouse and press CTRL + Enter to report this mistake to us. Thank you!
Please select a spelling error or a typo on this page with your mouse and press CTRL + Enter to report this mistake to us. Thank you!
Alliance Partner content request
Oops! Something went wrong.
Please, try again later.
Spelling error in text
Thank you!
Your feedback has been received and will be reviewed.