QNAP QuObjects
Alliance Partner: |
QNAP Systems, Inc. |
Alliance Product: |
QuObjects |
Program Category: |
Veeam Ready Repository - Capacity Target |
Category Description: |
Secondary backup target solutions that support object storage and are confirmed to be compatible with Veeam products’ object storage features and meet or exceed performance tests |
Article ID: |
1232 |
Veeam Product(s): |
|
Features and Attributes: |
|
Publication date: |
2024-11-25 |
Last modified date: |
2025-02-24 |
Upgrade to QuObjects 2.4.1785 is required due to several issues that have been resolved. See QNAP release notes for full details.
This Veeam Ready test was performed with storage having a configuration that includes SSD/Flash. As such, this classification only applies to similar configurations in which the same amount or more SSD drives are used. The use of non-SSD drives may negatively impact performance.
IAM/STS functionality is not supported by the solution.
Product Details
Model number: TS-h1886XU-RP-R2 - 32GB (QuObjects 2.4.1721)
Storage Category: S3 compatible object storage
Drive quantity, size, type: 5 x 1TB SSD (Samsung SSD 860 EVO 1TB)
Storage configuration: RAID 5
Firmware version: QuTS Hero 5.2
Connection speed: 10 GbE
Additional support: All configurations of TS-h1886XU-RP-R2 - 32GB (with QuObjects 2.4.1721) for S3 compatible storage with specifications equivalent or greater than the above.
General product family overview:
Designed for object service developers, QuObjects allows the creation of S3 compatible development environments on a QNAP NAS.
TS-h1886XU-RP-R2 - 32GB, used for current verification, supports ZFS-based QuTS hero operating system and features an Intel® Xeon® D-1622 quad-core processor with up to 128 GB DDR4 Error Correcting Code (ECC) memory.
Storage Category: S3 compatible object storage
Drive quantity, size, type: 5 x 1TB SSD (Samsung SSD 860 EVO 1TB)
Storage configuration: RAID 5
Firmware version: QuTS Hero 5.2
Connection speed: 10 GbE
Additional support: All configurations of TS-h1886XU-RP-R2 - 32GB (with QuObjects 2.4.1721) for S3 compatible storage with specifications equivalent or greater than the above.
General product family overview:
Designed for object service developers, QuObjects allows the creation of S3 compatible development environments on a QNAP NAS.
TS-h1886XU-RP-R2 - 32GB, used for current verification, supports ZFS-based QuTS hero operating system and features an Intel® Xeon® D-1622 quad-core processor with up to 128 GB DDR4 Error Correcting Code (ECC) memory.
Veeam Testing Configuration
Veeam Build Number: 12.1.2.172
Vendor recommended configuration
Vendor Settings:
- Networking: MTU = 9000
- Array deduplication used in testing: No
- Array compression used in testing: No
- Multipathing / link aggregation used: No
- Storage optimization: It is recommended to set the block size in the main VM backup job to 4 MB. Please note: changing the block size in existing jobs requires performing an active full after the change. Please reference the user guide for details: https://helpcenter.veeam.com/docs/backup/vsphere/compression_deduplication.html?ver=120#changing-storage-optimization-settings
Couldn't find what you were looking for?
Below you can submit an idea for an article.
Report a typo on this page:
Please select a spelling error or a typo on this page with your mouse and press CTRL + Enter to report this mistake to us. Thank you!
Please select a spelling error or a typo on this page with your mouse and press CTRL + Enter to report this mistake to us. Thank you!
Alliance Partner content request
Oops! Something went wrong.
Please, try again later.
Spelling error in text
Thank you!
Your feedback has been received and will be reviewed.