Hitachi Vantara VSP One Block

Model number: VSP One Block 26
Storage Category: All Flash Storage
Drive quantity, size, type: 40 x 1.9 TB SSD (SNM5C-R1R9NC), Drive Interface: NVMe
Storage configuration: RAID6 with 6D+2P drive configuration and 1 additional drive for Dynamic Drive Protection (DDP) setup
Firmware version: A3-03-01-40/01
OS version: SVOS 10.3.1
Connection protocol and speed: NVMe-oF (Ethernet), 100 GbE
Additional support: All configurations of Hitachi Vantara VSP One Block 26 with specifications equivalent or greater than the above

General product family overview:
VSP One Block is a block storage solution from Hitachi Vantara with NVMe all-flash scalable architecture.
It offers additional protection for hard drives by enabling Dynamic Drive Protection (DDP) feature. This provides additional hardware security along with the Deduplication and Compression for the volumes. 

Veeam Build Number: 12.2.0.334

Vendor Settings:

• Caching used: yes
• Read/write caching: Size: 256GB Type: DDR5 DIMM Use: It acts as a medium for temporarily storing data in rapidly accessible storage memory. By default, the storage uses Cache write-back to transfer data. 
• Networking: MTU = 9000
• Multipathing / link aggregation used: High Performance Plugin (HPP)
• Array deduplication used in testing: Yes
• Array compression used in testing: Yes

Additional storage settings:
With VSP One Block series, it is always recommended to use Dynamic Drive Protection (DDP) while creating a DP Pool. By default, VSP One Block only supports DP volumes with capacity Savings enabled. The volumes we used had Deduplication and Compression enabled.