TrueNAS F-Series
Alliance Partner: |
TrueNAS |
Alliance Product: |
F-Series |
Program Category: |
Veeam Ready Repository - Primary Target |
Category Description: |
Solutions certified as a primary backup target. Passing all compatibility/functional tests, as well as extensive performance tests for both backup and restore operations |
Article ID: |
1424 |
Veeam Product(s): |
|
Features and Attributes: |
|
Publication date: |
2025-03-31 |
Last modified date: |
2026-03-17 |
This Veeam Ready test was performed with storage having a configuration that includes SSD/Flash. As such, this classification only applies to similar configurations in which the same amount or more SSD drives are used. The use of non-SSD drives may negatively impact performance.
SMB write-through is supported on this platform and was used in the Veeam Ready testing. Continuous availability must be enabled for SMB share at the time of creation as it cannot be configured retrospectively. For more details about continuous availability read more at KB3124
Product Details
Model number: TrueNAS F60 with TrueNAS Enterprise 25.10
Storage Category: All Flash Storage
Drive quantity, size, type: 5 x 3.49 TiB NVMe (iXTPON4DCBD3T8R1)
Storage configuration: ZFS RAID group with Integrity checks (RAIDZ1)
Firmware version: TrueNAS Enterprise 25.10.2
Connection protocol and speed: SMB/CIFS, 100 GbE
Additional support: All configurations of TrueNAS F-Series with specifications equivalent or greater than the above
Best Practices: https://www.truenas.com/docs/solutions/integrations/veeam/
General product family overview:
TrueNAS is a unified storage that supports different configurations. The F-Series is a 2U system with dual controllers. Each controller has direct, low-latency access to the NVMe drives, and uses a dedicated high-bandwidth interconnect between controllers for synchronization and high-availability.
Storage Category: All Flash Storage
Drive quantity, size, type: 5 x 3.49 TiB NVMe (iXTPON4DCBD3T8R1)
Storage configuration: ZFS RAID group with Integrity checks (RAIDZ1)
Firmware version: TrueNAS Enterprise 25.10.2
Connection protocol and speed: SMB/CIFS, 100 GbE
Additional support: All configurations of TrueNAS F-Series with specifications equivalent or greater than the above
Best Practices: https://www.truenas.com/docs/solutions/integrations/veeam/
General product family overview:
TrueNAS is a unified storage that supports different configurations. The F-Series is a 2U system with dual controllers. Each controller has direct, low-latency access to the NVMe drives, and uses a dedicated high-bandwidth interconnect between controllers for synchronization and high-availability.
Veeam Testing Configuration
Veeam Build Number: 13.0.1.180
Vendor recommended configuration
Vendor Settings:
- Caching used: No
- Does vendor solution support SMB write-through? Yes
- How SMB write-through enabled/disabled? Enabled by default
- Was SMB write-through enabled during the testing? Yes
- Multipathing / link aggregation used: No
- Array deduplication used in testing: No
- Array compression used in testing: Yes
Couldn't find what you were looking for?
Below you can submit an idea for an article.
Report a typo on this page:
Please select a spelling error or a typo on this page with your mouse and press CTRL + Enter to report this mistake to us. Thank you!
Please select a spelling error or a typo on this page with your mouse and press CTRL + Enter to report this mistake to us. Thank you!
Alliance Partner content request