TRY NOW
book meeting

NetApp E5700 Hybrid-Flash Array

Veeam Ready Repository - Primary Target
Alliance Partner:

NetApp
Alliance Product:

E5700 Hybrid-Flash Array
Program Category:

Veeam Ready Repository - Primary Target
Category Description:

Solutions certified as a primary backup target. Passing all compatibility/functional tests, as well as extensive performance tests for both backup and restore operations
Article ID:

392
Veeam Product(s):
  • Veeam Backup & Replication 12
Features and Attributes:
  • Backup Target - Disk iSCSI
Publication date:

2022-04-21
Last modified date:

2023-06-27
This Veeam Ready test was performed with storage having a configuration that includes SSD/Flash.  As such, this classification only applies to similar configurations in which the same amount or more SSD drives are used.  The use of non-SSD drives may negatively impact performance.

Product Details

Model number: E5760
Storage Category: Hybrid Storage
Drive quantity, size, type: Four PX04SVB160 1.6TB SSDs with drive firmware version MS02
Storage configuration: Four SSDs configured in RAID10 volume group with total capacity of 2.9TB
Firmware version: SANtricity OS Software Version:  11.70.4R1
Connection protocol and speed: iSCSI 25GbE
Additional support: All configurations of NetApp E5760 with specifications equivalent or greater than the above

General product family overview:
Mid-level platform that contains dual E5700 controllers.  Each controller has 2 10Gbps iSCSI/16Gb FC SFP onboard ports, four 25Gb iSCSI ports on host interface card and 32GB RAM.  The controllers are in a 4U60 drive enclosure that can hold up to 60 drives, either NL-SAS, 10k SAS or SSDs.

Veeam Testing Configuration

Veeam Build Number: 12.0.0.1420 P20230223

Vendor recommended configuration

Vendor Settings:

  • Caching used: Read and write cache enabled.
  • Read/write caching: For the 64GB E5700 controller the read cache size is 35.5GB and the write cache is 16GB.
    Read cache is used to store data before sending it to the host and write cache is used to store the data before writing it to disks in the array.
  • Networking: MTU=9000
  • Multipathing / link aggregation used: VMW_SATP_ALUA
  • Array deduplication used in testing: No
  • Array compression used in testing: No

Couldn't find what you were looking for?

Below you can submit an idea for an article.
Request new content
Report a typo on this page:

Please select a spelling error or a typo on this page with your mouse and press CTRL + Enter to report this mistake to us. Thank you!
Alliance Partner content request
By submitting, you are agreeing to have your personal information managed in accordance with the terms of Veeam's Privacy Notice.
By submitting, you are agreeing to receive information about Veeam products and events and to have your personal information managed in accordance with the terms of Veeam's Privacy Notice.
Verify your email to continue your product download
We've sent a verification code to:
  • Incorrect verification code. Please try again.
An email with a verification code was just sent to
Didn't receive the code? Click to resend in sec
Didn't receive the code? Click to resend
Start using Veeam:
Download the product
&
Activate the license key

ty icon

Thank you!

We have received your request and our team will reach out to you shortly.

OK

error icon

Oops! Something went wrong.

Please, try again later.

Spelling error in text

Thank you!

Thank you!

Your feedback has been received and will be reviewed.

Oops! Something went wrong.

Please, try again later.

You have selected too large block!

Please try select less.