TRY NOW
book meeting

FalconStor StorSafe

Veeam Ready Repository - Primary Target
Alliance Partner:

FalconStor Software
Alliance Product:

StorSafe

Program Category:

Veeam Ready Repository - Primary Target
Category Description:

Solutions certified as a primary backup target. Passing all compatibility/functional tests, as well as extensive performance tests for both backup and restore operations
Article ID:

448
Veeam Product(s):
  • Veeam Backup & Replication 11
  • Veeam Backup & Replication 12
  • Veeam Backup & Replication 13
Features and Attributes:
  • Backup Target - Disk NFS
Publication date:

2022-09-06
Last modified date:

2026-05-26
This Veeam Ready test was performed with storage having a configuration that includes SSD/Flash.  As such, this classification only applies to similar configurations in which the same amount or more SSD drives are used.  The use of non-SSD drives may negatively impact performance.
Veeam Ready validation for FalconStor StorSafe 11.17 was conducted utilizing storage equipped with 2 x Intel(R) Xeon(R) Silver 4509Y 4.1G, 8C/16T CPUs and 128 GB DDR5 memory. Therefore, this classification is specifically relevant to configurations possessing equivalent CPU performance and an equal or greater amount of memory. Deviating from this specified configuration may negatively impact performance.

Product Details

Storage Category:  Software-defined storage
Drive quantity, size, type: 8 x 800GB NVMe (Dell DC NVMe ISE 7450 MU U.2)
Storage configuration: RAID 5
Firmware version: 11.17
Connection protocol and speed: 25 GbE NFS
Additional support: Deployments of FalconStor StorSafe 11.17 for S3 compatible storage on hardware with specifications equivalent or greater than above.

General product family overview:
FalconStor® StorSafe® software is a data protection optimization and modernization solution that can run in the cloud, on physical servers, or on virtual machines.

Veeam Testing Configuration

Veeam Build Number: 13.0.1.1071

 

Vendor recommended configuration

  • Networking: MTU=9000
  • Caching used: yes
  • Read/write caching: 
    • Write cache policy: Write Back
    • Read cache policy: Read Ahead
    • SSD Disk Cache: Enable    
    • HW Cache Size: Cache memory 8GB NV
    • The StorSafe NAS file system was base Linux RHEL8U10 Ext4 that cache setting with Ext4 default behavior. 
  • Multipathing / link aggregation used? No
  • Array deduplication used in testing: No
  • Array compression used in testing: No
Details on FalconStor StorSafe testing with Veeam Backup & Replication v 11
This Veeam Ready test was performed with storage having a configuration that includes SSD/Flash.  As such, this classification only applies to similar configurations in which the same amount or more SSD drives are used.  The use of non-SSD drives may negatively impact performance.

Product Details

Storage Category:  Software Defined Storage
Drive quantity, size, type: 7 x 2TB SSD
Storage configuration: RAID 5
Firmware version: v11.11 Build 12179
Connection protocol and speed: 10 GbE NFS
Additional support: Deployments of FalconStor StorSafe 11.11 for S3 compatible storage on hardware with specifications equivalent or greater than above.


General product family overview:
StorSafe is a 100% software product that runs on industry-standard servers or VMs located on-premises and in clouds and provides NAS resources with SMB/CIFS protocol while shrinking backup images with advanced compression and patented deduplication. 

Veeam Testing Configuration

Veeam Build Number: 11.0.1.1261 P20220302

Job Settings: Deduplication - enabled; Compression - optimal; Storage optimization - LAN target
Repository Settings: Repository type - NFS v3, Linux; Align backup file blocks - enabled; Decompress before storing - disabled; Per-VM Backup Files - enabled. 

Vendor recommended configuration

  • Networking: MTU=9000
  • Caching used: yes
  • Read/write caching:
    • Write cache policy: Write Back
    • Read cache policy: Read Ahead
    • Disk Cache: Default
  • Multipathing / link aggregation used? No
  • Array deduplication used in testing: Yes
  • Array compression used in testing: No
Details on FalconStor StorSafe testing with Veeam Backup & Replication v 12
This Veeam Ready test was performed with storage having a configuration that includes SSD/Flash.  As such, this classification only applies to similar configurations in which the same amount or more SSD drives are used.  The use of non-SSD drives may negatively impact performance.
Veeam Ready validation for FalconStor StorSafe 11.14 was conducted utilizing storage equipped with 2 x Intel Xeon Gold 6250 3.9G, 8C/16T CPUs and 384 GB DDR4 memory. Therefore, this classification is specifically relevant to configurations possessing equivalent CPU performance and an equal or greater amount of memory. Deviating from this specified configuration may negatively impact performance.

Product Details

Storage Category:  Software Defined Storage
Drive quantity, size, type: 6 x 2TB SSD
Storage configuration: RAID 5
Firmware version: v11.14 Build 12418
Connection protocol and speed: 10 GbE NFS
Additional support: Deployments of FalconStor StorSafe 11.14 for S3 compatible storage on hardware with specifications equivalent or greater than above.


General product family overview:
StorSafe is a 100% software product that runs on industry-standard servers or VMs located on-premises and in clouds and provides NAS resources with SMB/CIFS protocol while shrinking backup images with advanced compression and patented deduplication. 

Veeam Testing Configuration

Veeam Build Number: 12.1.2.172

 

Vendor recommended configuration

  • Networking: MTU=9000
  • Caching used: yes
  • Read/write caching: The read cache size is 256MB. It is used/cached when reading the SIR data unit which returns hash data.  
  • Multipathing / link aggregation used? No
  • Array deduplication used in testing: Yes
  • Array compression used in testing: Yes

 

Couldn't find what you were looking for?

Below you can submit an idea for an article.
Request new content
Report a typo on this page:

Please select a spelling error or a typo on this page with your mouse and press CTRL + Enter to report this mistake to us. Thank you!
Alliance Partner content request
By submitting, you are agreeing to have your personal information managed in accordance with the terms of Veeam's Privacy Notice.
By submitting, you are agreeing to receive information about Veeam products and events and to have your personal information managed in accordance with the terms of Veeam's Privacy Notice.
Verify your email to continue your product download
We've sent a verification code to:
  • Incorrect verification code. Please try again.
An email with a verification code was just sent to
Didn't receive the code? Click to resend in sec
Didn't receive the code? Click to resend
Start using Veeam:
Download the product
&
Activate the license key

ty icon

Thank you!

We have received your request and our team will reach out to you shortly.

OK

error icon

Oops! Something went wrong.

Please, try again later.

Spelling error in text

Thank you!

Thank you!

Your feedback has been received and will be reviewed.

Oops! Something went wrong.

Please, try again later.

You have selected too large block!

Please try select less.